Trusted Kitchen Remodeling Plumbing in Dana, IL

Sinks · Faucets · Garbage Disposals · Dishwashers · Gas Lines · Pot Fillers — Licensed Experts

Call Today: 779-217-8825

Comprehensive Kitchen Remodel Plumbing in Dana, IL

Kitchen plumbing during a remodel can be a quick faucet swap or a full overhaul involving moving sinks, installing gas lines, adding prep sinks, or fitting pot fillers. The extent of work affects cost, schedule, and permit needs. We’re ready for all scopes and ensure everything meets code.

Give us a call at 779-217-8825 early in your project. Plumbing is best coordinated before cabinet installation. For example, relocating sinks requires drain access when the subfloor is open. Gas line installation must happen before cabinets go in. Pot fillers need wall access behind the stove before backsplash goes in. Starting early helps avoid costly delays in Dana’s seasonal building schedules.

We also handle straightforward kitchen plumbing repairs and upgrades like faucet replacements, garbage disposal servicing, dishwasher hookups, and water line installations without remodeling. Remodeling is a perfect chance to inspect your water heater for capacity and clear any slow drains ahead of closing walls. Reach out at 779-217-8825 for any kitchen plumbing needs.

Our Kitchen Plumbing Services

Sink and Faucet Installation

We install all types of kitchen sinks — undermount, drop-in, farmhouse, single or double bowl, and prep sinks. Our installation includes fitting drain assemblies, strainers, P-traps, and supply lines with durable braided stainless steel connections. We also install garbage disposals alongside sink services to make the process smooth.

For faucets, we handle every configuration — single or multi-hole setups, deck plates, and all faucet styles. We pressure-test everything before completion. Moving sinks to new spots is more involved but within our expertise, including rerouting drains, adjusting venting, and extending supply lines with proper permits and inspections.

Dishwasher and Appliance Hookups

We connect dishwashers by tying into hot water lines and routing drain hoses with high loops or air gaps to prevent backflow. We also check with your electrician to confirm power connections comply. For refrigerators with ice makers or water dispensers, we run dedicated water lines with shutoff valves installed behind the unit.

Additional appliance plumbing we provide includes instant hot water dispensers and under-sink water filtration or reverse osmosis systems. We install dedicated faucets for filtration systems and help with ongoing maintenance advice. Call 779-217-8825 for any appliance connection questions.

Gas Line Installation for Kitchen Appliances

Switching to gas or adding a cooktop? We install gas lines sized for your appliance’s BTU rating, run piping from your meter or existing supply, install shutoff valves, connect appliances with flexible connectors, and conduct thorough pressure tests. We take care of permits and inspections to keep your kitchen safe and code-compliant.

Important: gas line installation must be finished before cabinet installation to avoid complex and costly rerouting later. We recommend scheduling this early in your remodel so your general contractor can plan accordingly.

Pot Filler Faucet Installation

A pot filler faucet adds convenience by letting you fill large pots right at the stove. Installation requires running a cold water supply line inside the wall about 56 to 60 inches above the floor and close to the cooking surface. This is easiest during framing or drywall phases but can also be retrofitted in finished kitchens with careful wall work. Reach out to discuss your options.

Island Sink Drain and Vent Solutions

Installing a sink in a kitchen island isn’t straightforward due to venting challenges. Island sinks require an island loop vent or an air admittance valve (AAV), depending on local codes. Supply lines are easy enough, but routing the drain through the floor and properly venting requires experience. We’ve done plenty of island sink installations and can guide your layout to code compliance.

Planning a Kitchen Remodel in Dana? Get Ahead with Plumbing Setup

Getting your plumber involved early avoids headaches later. Contact us at 779-217-8825 to schedule a consultation.

Call 779-217-8825

Checklist for Kitchen Plumbing Tasks

  • Removing and installing sinks (farmhouse, undermount, drop-in)
  • Faucet installation of all types and styles
  • Installation or replacement of garbage disposals
  • Dishwasher water supply and drain hookups
  • Water line installation for refrigerator ice makers
  • Gas line setup for ranges, cooktops, or ovens
  • Pot filler faucet rough-in and installation
  • Under-sink water filtration and reverse osmosis systems
  • Drain and vent routing for island sinks
  • Upgrading shutoff valves throughout the kitchen
  • Adding prep or bar sinks in islands or pantries

Timing Tips for Kitchen Plumbing

  • Set sink location early: Moving sinks is the priciest plumbing change, so lock down placement before demo or cabinetry orders.
  • Gas lines first: Rough in any gas piping for ranges or islands before cabinets are installed.
  • Pot fillers ahead of backsplash: Opening walls is much easier before tile goes up.
  • Upgrade shutoff valves: Swap brittle gate valves for ball valves while plumbing is exposed to prevent future leaks.
  • Refrigerator water lines: Run ice maker lines before countertops are installed for smoother installs.
Note on Kitchen Plumbing Costs Prices vary widely based on project scope—from a straightforward faucet and disposal replacement to a full kitchen plumbing rough-in with relocated sinks and added gas lines. We treat every job individually and provide fair, detailed quotes. Call 779-217-8825 to discuss your project specifics.

Kitchen Remodeling Questions Answered

Yes, but it’s one of the trickiest plumbing moves. Island sinks require specialized venting solutions like an island loop vent or an air admittance valve to prevent drain issues. The water supply is simple, but routing the drain takes careful design. We’ve done plenty of island sink installs—call us at 779-217-8825 to talk through your island plumbing before final plans.

If you’re just swapping out fixtures in the same spot like faucets or disposals, usually no permit is needed. But any work that involves rerouting drains, installing new water or gas lines, or changing the layout requires permits. We manage the permit applications and inspections to keep things compliant.

Yes, we specialize in gas line installations for kitchen appliances. It’s best done during remodeling when walls are open. We size the piping correctly, perform safety testing, and handle permits and inspections. Make sure to schedule gas rough-in before cabinetry goes into place.

Absolutely. We work closely with general contractors and kitchen designers to fit our plumbing work into your project timeline. Whether it’s rough-in or finish plumbing, we communicate and coordinate permits so your remodel goes smoothly. Call 779-217-8825 to get us involved early.

Start Your Dana Kitchen Remodel Right — Begin with Expert Plumbing

Licensed plumbing professionals, fully permitted work, working with your general contractor. From faucet swaps to full rough-ins, we’ve got you covered.

Call 779-217-8825
Call Now: 779-217-8825